A customer recently wrote to ask me how much handspun yarn she could expect get from a braid of my hand-dyed fiber and, to be honest, I was at a bit of a loss. How much yarn you’ll get varies from spinning style to spinning style …and from spinner to spinner. The thicker the yarn, the less yardage; the thinner it’s spun, the more yardage. Beyond that, it’s a very hard question to answer.
Hand-dyed BFL Combed Top, in Garden in Spring
And especially for me, because I hardly ever calculate the yardage on my handspun. I have no idea why — I just never do!
So I turned to my friend Natalie who is a more experienced (and excellent) handspinner and posed my customer’s question to her. She replied, “It’s usually 20 – 30 % less yardage than you’d get from the same amount (grams/ounces) of commercially spun yarn of the same weight (worsted, dk, fingering etc) because handspun tends to be denser. From 4oz, I’d expect 300-400 yards fingering; probably 200-300 of a dk/worsted range.”A much more technical and useful answer than mine!
The yarn spun by my friend from the Garden In Spring BFL
And then she added, “Hard to judge though… It’s all very variable.” Which made me feel a bit better!
I posted the prizes off to the winners of the Giveaway today and, before I slipped them into the envelopes, I just couldn’t resist taking a few pictures just so I could share them with you.
The two runners-up got 2oz each of this BFL fiber.
When I dyed this, I was going for a fiber version of Plumberry, the colourway of the newest yarn in the shop*. But, although I mixed the dyes up correctly, I did the dyeing in slightly the wrong order and the blue took on an amazing silver-grey tint. It doesn’t look like Plumberry to me but, let me tell you, it is really quite stunning! I might dye more like this, but I am undecided as to whether it deserves its own name, because dyeing is a dynamic process — even if I gave it a new name and tried to dye it this way again, it might come out of the dyepot with more blue and looking more like the original Plumberry… Hmmmm… Maybe the nature of Plumberry will be that it’s sometimes got this grey, sometimes got more blue. We’ll have to see.
Anyway, I do hope the runners up enjoy the lovely colours of their new fiber!
*You never saw the Plumberry yarn? That’s because both skeins sold in two hours! But I’ve dyed some more that will go in later this week.
————————————-
And for our winner, I’ve chosen a skein of Garden In Spring sock yarn. This is the first colourway I ever dyed for the shop and it is absolutely one of my favourites. It’s so bright and cheerful and just so darned happy, and I think that’s the very essence of how winning a giveaway ought to make a person feel!
Congratulations again to the winners, and I hope you enjoy using your yarn and fiber! And to everyone else, there will be more giveaways in the future, so keep your eyes open for those.
It’s the last few days to enter the giveaway to win a skein of SpaceCadet Creation’s hand-dyed Sock Yarn or two 2oz braids of hand-dyed fiber! The giveaway will come to a close at the end of Monday (11.59pm on May 31st to be exact) so, if you’re not entered, make sure you get entered before the end of the holiday weekend!
All you have to do is put your email address in the subscription box over there on the right, just above the SpaceCadet’s head. And, once you’ve done that, there are six ways to earn extra entries — for all the details, click here.
But remember, those extra entries will count only if you’ve subscribed to the blog using the subscription box right over there at the top of the right-hand column. While I am sincerely grateful for all my followers, I can’t see the people who subscribe through other feed aggrigators (such as Google Reader, Bloglines, etc) and so I’m afraid those subscriptions can’t count as entries. If you prefer to follow me through another feed aggrigator, please go ahead and do that, but also subscribe through the blog just for a few days, so your entry can be counted for the giveaway.
Thank you to everyone who has subscribed and entered so far. It’s been so exciting to “meet” all of you! Now go out there and tweet, post, follow, and friend your way to extra entries. And GOOD LUCK!
Wilson belonged to my friend Leslie (who was instrumental in creating the SpaceCadet logo) and he was a great dog. Everyone says that about their dogs, I know, but Wilson really was. I met him when he was starting his retirement career as a Pets as Therapy dog, visiting long-term residents at his local hospital who benefited from a bit of borrowed canine company. He was also an “Ambassa-dog” for a charity called the Dogs Trust, attending talks and events with Leslie and showing people just how lovely rescue dogs can be. And he worked behind the scenes at the charity too, where they used his excellent communication skills to help less confident rescue dogs become used to being around others. When I met him, Wilson was gentle and kind, tolerated my (then) 1-year-old’s clumsy curiosity, and lent against my leg with the kind of heaviness that tells you this dog would really like a nice scratch behind his ear.
Last month, Wilson lost his battle with a brain tumour, and when Leslie realised he didn’t have much time left, she asked me and another mutual spinning friend, Stephanie of OttertopWorkshop, whether it would be possible to spin up Wilson’s fur to knit a small square to go into his keepsake box. Or was that a crazy idea…? Stephanie and I both assured her it wasn’t at all crazy — it’d be a nice way to remember him — and we agreed that she should spend some quality time with Wilson in his last few day, fussing over him and brushing him, until she’d collected enough of his undercoat to spin a bit of yarn. I warned Leslie that it might need to be mixed with wool if it didn’t hold together well on its own and, though she agreed, I could sense that wasn’t what she really wanted. She wanted 100% Wilson — and I understood.
The bag of fur arrived on Friday, and I sat down immediately at my wheel. I’ve never successfully spun dog before — I’d tried years and years ago, with some Husky fur that a colleague had given me, but I couldn’t make a yarn that held together. But that was when I was a relatively new spinner, and I hoped I’d gained enough experience by now to coax a yarn out of Wilson’s uncooperative-looking fluff.
I began the wheel turning… slowly… slowly… just to see how the fur would behave. With such a short-stapled, uncrimped fiber, my hands quite naturally went to a long draw, and spun it with a bit of thickness. And it seemed to be holding together pretty well. I stopped the wheel and let the yarn twist back on itself and it looked good but… here… and there… I could see it wanted to come apart. I moved the drive band to a slower whorl for more control, loosened the brake a wee bit, and decided to go a bit thicker and to overspin it. It wouldn’t be as soft as I would like, but needs must. I could see that with a little overspin, Leslie could get the 100% Wilson yarn she really wanted, and I was determined to give her that if it were at all possible.
The overspinning worked and the yarn was (fairly) stable, thick, and surprisingly fuzzy. And I was covered in dog hair, which made laugh — all dogs shed, all humans complain about it, and here was Wilson being cheeky and still shedding on someone from beyond the grave! I took the bobbin off and put it on the lazy kate for Navajo plying — there hadn’t been enough fiber to split between two or three bobbins for proper plying, as I would have preferred.
Navajo plying was a bit of a trial — pulling the yarn through the loop was more friction than it could handle in places and it fell apart on me quite a few times — but I managed it in the end. Again, a little overtwist helped to hold it and, in this case, balanced the overtwist in the singles. When I was done plying, I grabbed my needles and knit it straight off the wheel. Normally I’d let the yarn rest and give it a wash, of course, but I didn’t want to lose any of the fiber’s Wilson-ness for Leslie, so I decided to leave it as it was.
Unfortunately, I got lost in my thoughts and cast too many stitches, so it came out as more of a rectangle than a square, but the yarn had held together surprisingly well during the knitting and so I decided to leave it as it was rather than stress the yarn by ripping back. When I cast off, I looked at the fuzzy rectangle in my hand, and decided that was probably just about right.
Before I wrote this piece, I emailed Leslie and asked her to clarify Wilson’s various jobs. I remembered them roughly, but wanted to be sure I got it all right. She replied with a list, and the last point on it read simply, “my best friend.” Of all the jobs that Wilson did, and all the joy he brought to people’s lives, I suspect his most important role was being Leslie’s best friend. I am honoured to have been able to help give her something to remind her forever of her lovely Wilson.
When I finally bought an MP3 player last year, I thought I’d be using it to listen to music, but it turns out that what I really listen to are fiber podcasts. I love ’em! Ever since I discovered there were these people out there just talking away about knitting, spinning, weaving, and dyeing, I’ve been addicted. Who wouldn’t be? A nearly endless source of people who get it and are right there, on tap, ready at any time of day or night to whisper in my ear about all thing fibery — while I’m doing the dishes or sweeping the floor or stuck in traffic or inexplicably wide awake in the dead of night. Who wouldn’t be hooked?!?
Well… ok, I know there are a lot of people who wouldn’t be, but that’s only because they’re not fiber freaks like you and I. In fiberista terms,the people who matter are the people who understand the allure of fiber, and that’s me, and you …and the podcasters. Here are some of my absolute favourites:
Cast-On from Brenda Dayne is the first fiber podcast I discovered and I think it is the absolute best — a benchmark for all other podcasters to work toward. Thoughtful, whimsical, educational, and always so beautifully put together, Cast-On is always a treat. Brenda is taking a sabbatical at the moment to recover from some health issues but, if you’ve never listened, it’s worth working your way through the archives while we wait for her return.
FiberBeat is what I imagine the B-52s would come up with if they decided to record a fiber podcast. WonderMike has created a zany podcast that, while always full of interesting interviews, news, and information, is also chock full of crazy random audio madness that has me laughing out loud. You’ll have to listen to see what I mean, but that’s no hardship.
Insubordiknit from spinning artist Jacey Boggs is a rare treat — rare because she produces episodes randomly and seldom, but a treat because they are so completely worth the wait. Jacey is famous in the fiber world for her art yarns — unique, creative, and stunning… but always stable and balanced. Listening to her talk through their creation is wonderfully inspiring.
These great podcasters keep me wrapped in fibery goodness even when I can’t be spinning or knitting — a wonderful thing. And you know what? I’d like to find more fiber podcasts just like them! What are your favourite podcasts? Who should I be listening to? I’d love to know.
I had a customer enquire last week about giving a SpaceCadet Creations gift certificate… and I was quite shocked to realise I hadn’t even thought of them before!
Selling on Etsy, it’s a bit tricky to do gift certificates (Etsy doesn’t have the functionality for either gift certificates or for discount codes, unfortunately) and it took quite a bit of digging around, but I finally figured out how to do it. And… TA DA!!!!… I am delighted to announce that Space Cadet Gift Certificates can be now be purchased through PayPal! Just click on the link in the sidebar to the right (just under the SpaceCadet’s head) to be taken to a screen that will walk you through the process.
